Yealink SIP-T2XP Administrator's Manual page 117

2. Select the desired value from the pull-down list of Fwd International.
3. Click Confirm to accept the change.
To configure call forward in phone mode via phone user interface:
1. Press Menu->Features->Call Forward.
2. Press or
soft key.
3. Depending on your selection:
a) If you select Always Forward:
1) Press or
Always field.
2) Enter the destination number you want to forward all incoming calls to in the
Forward To field.
3) (Optional.) Enter the always forward on code and off code respectively in the
On Code and Off Code fields.
b) If you select Busy Forward:
1) Press or
Busy field.
2) Enter the destination number you want to forward all incoming calls to when
the IP phone is busy in the Forward To field.
3) (Optional.) Enter the busy forward on code and off code respectively in the
On Code and Off Code fields.
c) If you select No Answer Forward:
1) Press or
to select the desired forwarding type, and then press the Enter
, or the Switch soft key to select the desired value from the
, or the Switch soft key to select the desired value from the
, or the Switch soft key to select the desired value from the
Configuring Basic Features
101