Yealink SIP-T2XP Administrator's Manual page 361

Range
Example
Parameter-
ldap.display_name
Description
Format
Default Value
Range
Example
Parameter-
ldap.version
Description
Format
Default Value
Range
Example
Parameter-
ldap.call_in_lookup
Description
String within 99 characters
ldap.numb_attr = telephoneNumber
Configuration File
<y0000000000xx>.cfg
Configures the display name of the contact
record displayed on the LCD screen.
Note: It is not applicable to SIP-T19P and
SIP-T20P IP phones. The value must start with
"%" symbol.
String
Blank
String within 99 characters
ldap.display_name = %cn
The cn of the contact record is displayed on
the LCD screen.
Configuration File
<y0000000000xx>.cfg
Configures the LDAP protocol version
supported by the IP phone. Make sure the
protocol value corresponds with the version
assigned on the LDAP server.
Note: It is not applicable to SIP-T19P and
SIP-T20P IP phones.
Integer
3
2 or 3
ldap.version = 3
Configuration File
<y0000000000xx>.cfg
Enables or disables the IP phone to perform
an LDAP search when receiving an incoming
call.
Appendix
345