Yealink SIP-T2XP Administrator's Manual page 135

5. Enter the HTTPS port number in the HTTPS Port (1~65535) field.
The default HTTPS port number is 443.
6. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
7. Click OK to reboot the IP phone.
To configure web server type via phone user interface:
1. Press Menu->Settings->Advanced Settings (password: admin)
->Network->Webserver Type.
2. Press or , or the Switch soft key to select the desired value from the HTTP
Status field.
3. Enter the HTTP port number in the HTTP Port field.
4. Press or , or the Switch soft key to select the desired value from the HTTPS
Status field.
5. Enter the HTTPS port number in the HTTPS Port field.
6. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of time.
Calling line identification presentation (CLIP) allows IP phones to display the caller
identity, derived from a SIP header contained in the INVITE message when receiving an
incoming call. IP phones support deriving caller identity from three types of SIP header:
From, P-Asserted-Identity and Remote-Party-ID. Identity presentation is based on the
Configuring Basic Features
119