Yealink SIP-T2XP Administrator's Manual page 377

Format
Default Value
Range
Example
Parameter-
network.lldp.enable
Description
Format
Default Value
Range
Example
Parameter-
network.lldp.packet_interval
Description
Format
Default Value
query.
X ranges from 1 to 6.
Integer
0
Valid values are:
0-UDP
1-TCP or TLS.
account.1.naptr_build = 0
Configuration File
<y0000000000xx>.cfg
Enables or disables LLDP feature on the IP
phone.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Boolean
1
Valid values are:
0-Disabled
1-Enabled
network.lldp.enable = 1
Configuration File
<y0000000000xx>.cfg
Configures the amount of time (in seconds)
between the transmissions of LLDP packet.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect. It works only if the parameter
"network.lldp.enable" is set to 1 (Enabled).
Integer
60
Appendix
361