How To Achieve Multiple Cascade - RGBlink VSP 516S Quick Start Manual

Hide thumbs Also See for VSP 516S:

Table of Contents

How to Achieve Multiple Cascade

The working principle of VSP 516S multiple cascade is assigned the front signal to corresponding VSP

516S video processors, again synchronous external timing through processor, and wholly enlarge the

picture and intercept corresponding display area according to the corresponding control area to achieve

the function of integral display a complete picture, through the central control or computer, it can realize

the synchronous broadcasting and at the same time seamless switching.

Here, we will illustrate the operation. For example, the LED display is 2400 * 1024, and now we will

cascade with 2 pieces of VSP 516S, specific steps are as follows:

1. Connection and Setting

(1) Connect the DVI signal to DVI interface of the two VSP 516S through DVI distributor (DXP 0108).

(2) Divide the LED display into two parts, respectively for 1152*1024 and 1248*1024, and connect the

DVI output interface of the two VSP 516S to two sending cards.

(4) Choose DVI input signal for the two VSP 516S, and set both the VSP 516S output resolution for

1280 * 1024.

2. Multiple Cascade

(1) Push the [SCALE/CROP] button of the first VSP 516S, and scale the screen to the actual points.

Choose <H SIZE> in menu option, and set the width as 1152 by the knob or number button, push

the knob to confirm.

Turn the knob, and choose <V SIZE> in menu option, and set the height as 1024 by the knob or

number button, push the knob to confirm. If input the wrong value, push [MENU/EFFECT] button to

exit.

The same method, set the width and height of the second VSP 516S as 1248*1024.

(2) Push the [SCALE/CROP] button of the first VSP 516S, and choose [SPLIT], turn the knob and

choose <SPLIT>, push the knob to confirm, then turn the knob and choose [ON] to enable the

SPLIT function.

Set the following items by knob or number button, (The operations are same with [SCALE]).

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197

Email: rgblinkcs@gmail.com

Fax:00865925771202

http://www.rgblink.cn

Table of Contents