Din Rail Mount - Sierra Wireless AirLink LS300 Hardware User's Manual

Rev 5 Apr. 13
2
1
6 mm (0.24 in.)
Figure 3-9: LS300 Mounting Bracket for flat surfaces
To mount the LS300 on a flat surface using the mounting bracket:
1. Line up the LS300 with either set 1 or set 2 holes, depending on the desired
orientation. (See Figure
2. Attach the LS300 to the bracket with the three M3 mounting screws. Torque
the screws to a maximum of 10 in-lb. (1.1 N-m).
3. Attach the bracket/LS300 combination to the mounting surface.
4. Connect the bracket to ground (the battery or power source negative
terminal) by connecting a grounding strap under one of the mounting bracket
screws. This provides protection from electrostatic discharges.

DIN Rail Mount

If you are mounting the LS300 on a DIN rail, order mounting bracket kit
P/N 6000558 (DIN Rail Mounting Bracket for LS300) from Sierra Wireless. The kit
contains:
• L-shaped DIN Rail Mounting Bracket—Qty 1
• DIN Rail Clip (35 mm EN 50022)—Qty 1
1
2
1
2
106 mm
(4.17 in.)
Top view
119 mm
(4.68 in.)
89 mm
(3.50 in.)
Side view
3-9.)
Installation and Startup
10 mm (0.39 in.)
60 mm
(2.36 in.)
29