Sierra Wireless AirLink LS300 Hardware User's Manual page 30

AirLink LS300 Hardware User Guide
30
• Screw M3—Qty 4
• Screw M4—Qty 4
Attach LS300 here
96 mm
Figure 3-10: DIN Rail Mounting Bracket
To attach the LS300 to a horizontally mounted DIN rail:
1. Install the SIM card. (See
2. Test the network connectivity.
It is important to first ensure network connectivity because once the device is
attached to the L-shaped DIN rail mounting bracket, access to the SIM card is
restricted.
a. Connect the LS300. Power it up and ensure that you have network
connectivity. (See
3. Place the LS300 on the DIN rail mounting bracket, lining up the mounting
holes on the underside of the device with the holes on the DIN rail mounting
bracket.
4. Use the M3 screws provided to attach the LS300 to the bracket. Torque the
screws to a maximum of 10 in-lb. (1.1 N-m).
5. Use the screws provided to attach the DIN rail clip to the bracket.
6. Attach the DIN rail clip to a horizontal DIN rail, with the spring clip at the
bottom, taking into account the location information described in
Mounting the LS300
Note: The DIN rail bracket and clip in the kit Sierra Wireless provide is not intended for use
on DIN rail that is mounted vertically.
Step 1—Insert the SIM Card
Step 4—Connect the Power
on page 28.
Attach the DIN
rail clip here
79.5 mm
on page 18.)
on page 21)
Step 7—
4112895