System Settings]; [Language Selection]; [Measurement Unit Setting]; [Paper Tray] - Konica Minolta bizhub 4050 User Manual

4.1

[System Settings]

4 [User Settings]
4.1 [System Settings]

[Language Selection]

To display: [Utility] - [User Settings] - [System Settings] - [Language Selection]
Select a language to display information on the Touch Panel.
Settings
[Language Selection
Display]
[Panel Keyboard Lan-
guage Synchronization
Setting]
[Panel Keyboard Lan-
guage Selection]

[Measurement Unit Setting]

To display: [Utility] - [User Settings] - [System Settings] - [Measurement Unit Setting]
Select a measurement unit for numeric values displayed on the Touch Panel from [mm] and [Inch].
The default value depends on the region the machine is used in.

[Paper Tray]

To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray]
Specify the settings related to selection and switching of paper trays.
Settings
[Auto Tray Select]
[Auto Tray Switching]
[Print Lists]
[Auto Paper Selection
Setting]
[Description of Utility Keys]
Description
Select a language to display information on the Touch Panel.
The default value depends on the region the machine is used in.
Select whether or not to synchronize the language of the keyboard to be dis-
played on the Touch Panel with the language to be displayed on the Touch
Panel.
[Synchronize] is specified by default.
If [Do Not Synchronize] is selected in [Panel Keyboard Language Synchroniza-
tion Setting], select the language of the keyboard to be displayed on the Touch
Panel.
The default value depends on the region the machine is used in.
Description
When you have selected [Auto] in [Paper], select target paper trays for auto tray
selection. The machine selects the tray loaded with optimal paper among the
trays set to [ON].
[ON] is specified by default in every case.
When the paper tray has become empty during printing, select whether or not
to enable automatic switching to a paper tray that contains paper of the same
size, same orientation, and same type (ATS: Auto Tray Switch).
However, ATS is available for the paper tray that is selected in [Auto Tray Se-
lect].
[OFF] is specified by default.
Select a paper tray to print out various lists such as the configuration list or
counter list.
[Tray 1] is specified by default.
Specify whether or not to automatically select the tray with [User1] or [User2]
loaded when [Auto] is selected for [Paper].
[OFF] is specified by default in every case.
4
4-2