Konica Minolta bizhub 4050 User Manual page 56

5.8 [Fax Settings]
Settings
[Confirm Addr (Reg-
ister)]
[Restrict Fax TX]
[Restrict Fax RX]
[PC-FAX Restricted]
[Restrict Internet
Fax TX]
[Restrict Internet
Fax RX]
[Memory RX Setting]
[Closed Network RX]
[Forward TX Setting]
[Enable Settings]
[Forward Dest.]
[Output Method]
[File Type]
[PC-Fax RX Setting]
[Enable]
[Print]
[TSI User Box Setting]
[Enable Settings]
[Print After Receive]
[TSI User Box Reg-
istration]
[Action when TSI
User Box is not set.]
[Description of Utility Keys]
Description
Select whether or not to require the user enter a fax number twice to register
it when, for example, registering a destination or forwarding destination.
This is convenient to prevent the fax number from being incorrectly registered.
[ON] is specified by default.
Select whether or not to allow G3 fax transmission.
[Allow] is specified by default.
Select whether or not to allow G3 fax receiving.
[Allow] is specified by default.
Select whether or not to allow PC-Fax TX using the fax driver.
[Allow] is specified by default.
Select whether or not to allow Internet fax transmission.
[Allow] is specified by default.
Select whether or not to allow Internet fax receiving.
[Allow] is specified by default.
Select whether or not to use the Memory RX function.
When using the Memory RX function, enter the password to restrict access to
the Memory RX User Box (using up to eight digits).
[OFF] is specified by default.
Select whether or not to use the Closed Network RX function.
When using the Closed Network RX function, enter the password to restrict
peers (using 4 digits). Inform the peer of the password you entered here.
[OFF] is specified by default.
Configure the settings for using the Forward TX function.
Select whether or not to use Forward TX.
[OFF] is specified by default.
Specify a destination where to forward a received fax.
Directly enter the fax number or display the address book, then select the de-
sired one from the destinations (fax destinations, E-mail destinations, and In-
ternet fax destinations) registered on this machine.
Select whether or not to print a received fax on this machine when forwarding
it.
• [Forward & Print]: A received fax is forwarded and printed on this machine.
• [Forward & Print (If TX Fails)]: A received fax is forwarded and printed on
this machine.
[Forward & Print (If TX Fails)] is specified by default.
Select a file type to forward a received fax.
[PDF] is specified by default.
Configure the settings for using the PC-Fax RX function.
Select whether or not to use the PC-Fax RX function.
[Restrict] is specified by default.
Select whether or not to print a received fax after it has been received.
[OFF] is specified by default.
Configure the settings for using the TSI Routing function.
Select whether or not to use the TSI Routing function.
[OFF] is specified by default.
Select whether or not to print a received fax after it has been received.
[NO] is specified by default.
Register forwarding destinations for each sender's fax number (TSI). Select a
desired registration number, then tap [Edit].
• [Sender (TSI)]: Specify a sender's fax number.
• [Forwarding Destination]: Tap the list icon, then select the desired destina-
tion (SMB, FTP, or E-mail (Internet fax) destination).
Select the action to be taken by the machine if a fax number (TSI) is not regis-
tered and no forwarding destination is received.
• [Automatically Print]: Prints a received fax without saving it in a box.
• [Memory RX User Box]: Saves received documents in Memory RX User
Box.
[Automatically Print] is specified by default.
5
5-26