[Qr Code Setting] - Konica Minolta bizhub 4050 User Manual

5.9 [System Connection]

[QR Code Setting]

To display: [Utility] - [Administrator Settings] - [System Connection] - [QR Code Setting]
Configure a setting to display network information of this machine, which is required to associate with a mo-
bile terminal, as the QR code on the screen of this machine.
Settings
[Display Setting]
[Wireless Connection
Setting]
[Wireless Connection
Method]
[Individual Settings]
[Description of Utility Keys]
Description
Select whether or not to display the QR code on the screen of this machine.
[OFF] is specified by default.
Select whether or not to specify the method to establish a wireless connection
between a mobile terminal and this machine.
The information specified here is applied to the QR code.
[No] is specified by default.
Select whether to use the MFP wireless settings or individually specify the ap-
propriate method, in order to establish a wireless connection between a mobile
terminal and this machine.
[Use MFP Wireless Setting] is specified by default.
Specify the wireless connection method if [Individual Settings] is selected in
[Wireless Connection Method].
• [SSID]: Enter the SSID of the access point (using up to 32 bytes).
• [Authentication/Encryption Algorithm]: Select the algorithm to be used for
authentication or encryption. [No Authentication/Encryption] is specified by
default.
• [WEP Key Settings]: Specify this option if [WEP] is selected in [Authentica-
tion/Encryption Algorithm]. In [Key Input Method], select the entry method,
then enter the WEP key.
• [Passphrase Settings]: Specify this option if an algorithm other than [WEP]
is selected in [Authentication/Encryption Algorithm]. In [Key Input Method],
select the entry method, then enter the passphrase.
5
5-31