5.6
[Copier Settings]
5.6
[Copier Settings]
[Specify Tray When APS OFF]
To display: [Utility] - [Administrator Settings] - [Copier Settings] - [Specify Tray When APS OFF]
Select a paper tray to switch to after releasing the selection of [Auto] for [Paper].
-
[Tray Before APS ON]: Switches to the paper tray specified before releasing the selection of [Auto].
-
[Default Tray]: Switches to Tray 1.
[Tray Before APS ON] is specified by default.
[Default Paper Type settings for Manual Tray]
To display: [Utility] - [Administrator Settings] - [Copier Settings] - [Default Paper Type settings for Manual
Tray]
Specify the default paper type used in the Manual Feed Tray. If paper is loaded into the Manual Feed Tray,
the default paper type is automatically set.
[Plain Paper] is specified by default.
[Letterhead duplex print permission settings]
To display: [Utility] - [Administrator Settings] - [Copier Settings] - [Letterhead duplex print permission settings]
Select whether or not to allow printing on both sides of letterhead paper.
[Restrict] is specified by default.
Tips
To allow printing on both sides of letterhead paper, use plain paper as the letterhead paper type. Also, load
the letterheads into the paper tray as shown below.
-
When loading letterhead paper into Tray1, place the side that has the company name, fixed phrases,
and other texts printed face up.
-
When loading letterhead paper into Manual Feed Tray, place the side that has the company name,
fixed phrases, and other texts printed face down.
[Description of Utility Keys]
5
5-19