Lldp Local Device - HP 1810-24G Management And Configuration Manual

Table 29 LLDP Configuration Fields (continued)
Field
Notification Interval
Interface
Transmit Enable
Receive Enable
Enable Notification
Transmit Mgmt Info
Click Apply to save any changes for the current boot session; the changes take effect immediately.

LLDP Local Device

Use the LLDP Local Device page to view information about devices on the network for which the
switch has received LLDP information.
To display the Local Device page, click LLDP > Local Device in the navigation pane.
Figure 37 LLDP Local Device Page
Table 30 LLDP Local Device Fields
Field
Chassis ID
Chassis ID Subtype
Capabilities Supported
Description
Specify a limit for the transmission of notifications (range 5–3600 seconds, default =
5).
Interface Mode
The list of all physical and trunk interfaces on the system.
Enable or disable the transmission of LLDP PDUs. The default is enabled.
Enable or disable the ability of the port to receive LLDP PDUs. The default is enabled.
Enable to have LLDP generate a log file entry.
Enable or disable the transmission of management information with the LLDP PDUs. The
default is enabled.
Description
Local Device Summary
The source of the chassis identifier (System MAC address).
The type of the source of the chassis identifier (MAC address).
Displays the system capabilities of the local system. The default is Bridge.
LLDP Local Device 51