Assembly Diagram - Olympus BX45 Instructions Manual

ASSEMBLY

8-1 Assembly Diagram

The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of
assembly.
The module numbers shown in the following diagram are merely the typical examples. For the modules with which the
module numbers are not given, please consult your Olympus representative or the catalogues.
# When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any
parts or touching glass surfaces.
Assembly steps enclosed in
}All assembly operations are possible by using the Allen screwdriver (
Slide holder
U-HLD-4
U-HRD-4
U-HLS-4
U-HRS-4
Stage clamping
screw
28
will be detailed on the subsequent pages.
Eyepiece
WHN10X
UIS objective
PlanN10XCY
PlanFLN10XCY
UIS2/UIS
series
Marker
objective
U-MARKER
Slide holder
clamping knobs
Stage
U-SVRC
U-SVLC
U-SRG2
) provided with the microscope.
Observation tube
U-ETBI
U-TTBI
U-BI30-2
U-TBI3
U-TR30-2
Intermediate attachment
U-EPA2
U-DA, etc.
Tube clamping screw
Microscope frame
BX45TF
Halogen bulb
6V30WHAL
Lamp
socket
U-LS30-4
Power cord