Olympus BX45 Instructions Manual page 34

Fig. 40
Fig. 41
30
7
@
³
²
ƒ
|
Attaching the Power Cord
The power cord is vulnerable when bent or twisted. Never subject it
to excessive force.
Make sure that the main switch @ is set to "
necting the power cord.
Always use the power cord provided by Olympus. IF no power cord
is provided with the microscope, please select the proper power cord
by referring to section "PROPER SELECTION OF THE POWER SUPPLY
CORD" at the end of this instruction manual.
1. Connect the power cord plug ² to the AC receptacle ³
The power cord should be connected to a grounded, 3-conductor
power outlet. If the power outlet is not grounded properly, Olympus
can no longer warrant the electrical safety performance of the equip-
ment.
2. Plug the power cord plug | into the wall outlet ƒ.
If the power cord comes in contact with the lamp socket or the
surroundings, the cord may melt down, causing electric shock haz-
ards. Be sure to distribute the power cord at enough distance from
the lamp socket.
(Figs. 40 & 41)
" (OFF) before con-