Machine Maintenance Control - Konica Minolta bizhub 654e User Manual

1.3 Precautions for Operation Control
Function Name
DPWS Settings (Printer Set-
tings/Scanner Settings)
LPD Setting
Bluetooth Setting *
Manual destination entry prohi-
bition
External Memory Function Set-
tings (Save Document)
*: It will not be displayed in case of service mode where the setting is not configured.

Machine Maintenance Control

The administrator of the machine should perform the following maintenance control activities.
- Provide adequate control over the machine to ensure that only the Service Engineer is able to perform
physical service operations on the machine.
- Provide adequate control over the machine to ensure that any physical service operations performed
on the machine by the Service Engineer are overseen by the administrator of the machine.
- Some options require that Enhanced Security Mode be turned [OFF] before they can be used on the
machine. If you are not sure whether a particular option to be additionally purchased is fully operational
with the Enhanced Security Mode turned [ON], contact your Service Representative.
- Install the machine at a safe site that can be monitored and operate and manage the machine while
ensuring that the machine is protected from unauthorized physical access.
bizhub 754e/654e
Setting Procedure
• Using [Administrator Settings] ö [Network Settings] ö [DPWS
Settings], set [Printer Settings] to [OFF].
• Using [Administrator Settings] ö [Network Settings] ö [DPWS
Settings], set [Scanner Settings] to [OFF].
Using [Administrator Settings] ö [Network Settings] ö [Detail Set-
tings], set [LPD Setting] to [Disable].
Using [Administrator Settings] ö [Network Settings], set [Bluetooth
Setting] to [Invalid].
The administrator of the machine registers only fax destinations and
E-mail addresses with S/MIME certificates.
Using [Administrator Settings] ö [System Settings] ö [User Box Set-
tings] ö [External Memory Function Settings], set [Save Document] to
[OFF].
1
1-10