Setting The External Server - Konica Minolta bizhub 654e User Manual

2.5 Setting the Authentication Method
2.5.2

Setting the External Server

0 If [External Server Authentication] is selected for the authentication method, the External Server must
be registered in the machine in advance.
0 For the procedure to call the User Authentication/Account Track screen on the display, see steps 1 and
2 of page 2-20.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
NOTICE
Set 3DES or higher for the encryption level and SHA-1 or higher for the hashing function with the Kerberos
protocol of the Active Directory.
1
Call the User Authentication/Account Track screen on the display from the control panel.
2
Touch [External Sever Settings].
3
Touch the specific Sever Registration key, in which no sever has been registered.
4
Touch [New].
% To change or delete a previously registered server, touch [Edit] or [Delete].
5
Touch [Server Type].
bizhub 754e/654e
2
2-23