Oki ES5112dn Maintenance Manual page 48

Category Item
ADMIN OTHERS LANGUAGE LANG
SETUP SETUP SETUP INITIALIZE
FONT OUTPUT
SETUP MODE
JOB CANCEL
CANCEL KEY
SETUP BEHAVIOR
INQUIRY
DISPLAY
FOCUS
POSITION
Value Default Function / Notes
EXECUTE Initialize the message file
loaded in FLASH.
The following message for
confirmation will appear by
pressing OK key.
ARE YOU SURE?
YES ／ NO
If NO is selected, it will go
back to the source menu.
The procedure for clearing
disk will start immediately
after the menu and
rebooting.
Only the printer which
support muilty languages
DOWNLOAD model support
this menu.
JIS90 Set the Output Mode of
JIS2004 * Font.
【Conditions for display】
． Domestic brand
（JP1,JPOEM1)
SHORT * Specify the behavior when
LONG Cancel button is pressed in
OFF printing.
SHORT: Cancel the current
job by pressing Cancel
button below 2 seconds.
LONG: Cancel the current
job by pressing Cancel
button in 2 - 5 seconds.
OFF: Ingore the press of
Cancel button. The printing
can not be cancelled by
pressing cancel button.
ON * Specify whether the Job
OFF Cancel selection request
will be displayed.
ON: Display when Job
Cancelling.
OFF: Do not displasy.
YES * Specify the default selection
NO of Job Cancel request.
Category Item
ADMIN OTHERS JOB DISPLAY
SETUP SETUP TIMEOUT
CANCEL
SETUP
SETTINGS MENU RESET
SAVE MENU
3. ADJUSTMENT
Value Default Function / Notes
60 Specify the timeout of Job
Cancel selection request.
～
180 * When the time passed, the
～ printing will be continued as
300 Job Cancel = No.
EXECUTE – Resets EEPROM of CU.
Resets User menu to the
factory default.
If Execute is selected, It
exits from the menu after
the COMPLETE character
is displayed. However, when
this function is executed
with PJL, WINDOW
named COMPLETE is not
displayed.
EXECUTE – Saves menus currently set.
With this function, the menus
with which operation was
last performed are saved,
and overwrites with them
menus that were previously
saved.
When the Enter switch
is pressed, the following
confirmation message
appears.
ARE YOU SURE? YES/NO
When NO is selected,
next preceding menus are
restored.
When YES is selected, the
current menu settings are
saved and this menu is
exited.
3-4