Oki ES5112dn Maintenance Manual page 26

Status level Error code
LCD
Error 460 LOAD %MEDIA_SIZE%/
%MEDIA_TYPE%
AND PRESS ONLINE
SWITCH
%ERRCODE%:%TRAY%
SIZE MISMATCH
Error 420 REDUCE PRINT DATA
%ERRCODE%:MEMORY
OVERFLOW
Error DOWNLOAD
(ONLINE) MESSAGE
PROCESSING
Error DOWNLOAD
(ONLINE) MESSAGE
WRITING
Error DOWNLOAD
(ONLINE) MESSAGE
SUCCESS
Error DOWNLOAD
(ONLINE) MESSAGE
FAILED %CODE%
LED
Function
Ready Atten
Off Blink The size of paper or media type in
the tray does not match the print
data.
Load paper in tray
(It takes a while until the status
disappears after you have closed
the tray and the lever lifted.)
Error 460 : MP TRAY
After replacing the form, the user
should press the ONLINE key.
Off Blink Memory capacity overflows due to the
following reason.
Press ON-LINE switch so that it
continues. Please reduce print data.
- Too much print data in a page.
- Too much Macro data.
- Too much DLL data.
- After frame buffer compression,
over flow occurred.
- EmailToPrint.
Varies Varies Indicates that message data to be
updated is being processed.
Varies Varies Indicates that message data to be
updated is being written.
Varies Varies Indicates that message data to
be updated has been written
successfully.
Varies Varies Indicates that writing of message
data to be uploaded has been failed.
%CODE% is a decimal value (one
digit) and represents the cause of
failure in writing.
= 1 ... FAIL: Other errors.
= 2 ... DATA_ERROR: Hash check
error in data reading/writing, or
abnormal FLASH
= 3 ... OVERFLOW: Downloading
failure due to FLASH memory full
at starting or during writing in a
language file
= 4 ... MEMORYFULL: Memory
reservation failure
= 5 ... UNSUPPORTED_DATA:
Downloading data unsupported on
the printer
Status level Error code
LCD
Error NETWORK CONFIG
(ONLINE) WRITING
Error WAIT A MOMENT
(ONLINE) NETWORK INITIAL
Error 517 PRESS ONLINE SW
%ERRCODE%:WIRELESS
STARTUP ERROR
Error 506 PRESS ONLINE SW
(ONLINE) %ERRCODE%:NOT
CONNECTED TO
WIRELESS ACCESS
POINT
Error 519 PRESS ONLINE SW FOR
(ONLINE) RESTORATION
%ERRCODE%:RECEIVING
DATA TIMEOUT
Error 302 PLEASE TRY AGAINE
(ONLINE) %ERRCODE%:FW
UPDATE ERROR.IF
NETWORK DOESN'T
WORK,PLEASE TRY
FW UPDATE OVER
USB
Error 581 CLOSE FACE UP
STACKER
%ERRCODE%:DUPLEX NOT
AVAILABLE
2. Procedures for Repairing
LED
Function
Ready Atten
Varies Varies This appears during the NIC
configuration data is storing into
the flash memory, as the setting
was changed.
Varies Varies This appears when the NIC
initialization is occurred, as the
setting was changed.
Off Blink An error occurred at the
communication with wireless
bridge. For example, response
timeout, etc.
This status only for wireless LAN
printer.
Off Blink Can not setup communication with
an Access Point(there is not an
usable AP).
This status only for wireless LAN
printer.
Varies Blink When receiving data by Port9100,
LPR, FTP, IPP, WSD, or Email, a
timeout occurred in stream.
Varies Varies FW Update was failed.
When this error occured, the FW
U p d ate ne e d s to b e exe c ute d
again, and the printer needs to
keep On-Line.
Off Blink It is occurred when duplex printing
pages are added at the face up
stacker cover opened.
2-10