Oki ES5112dn Maintenance Manual page 22

Status level Error code
LCD
Normal CANCELING JOB
(USER DENIED)
Normal CANCELING JOB
(BUFFER FULL)
Normal 
ADJUSTING TEMP.
Normal

ADJUSTING TEMP
Normal 
POWER SAVE
Normal INVALID OPERATION Varies Varies With the printer unable to switch
Normal
□
SLEEP MODE
Normal FLASH DOWNLOAD
Normal PLEASE WAIT
EXECUTING
MAINTENANCE
LED
Function
Ready Atten
Blink Varies Indicates a job being cancelled
due to no print permit. (Related to
JobAccount)
1. A job received from a user who
is denied printing.
2. A color job received from a user
who is denied color printing.
Blink Varies Indicates that a job is being
cancelled because the printer area
where the logs are stored has
been used up and also "Cancel
job" is specified as an operation
at the time of Log Full. (Related to
JobAccount)
Varies Varies Shows cooling down status.
It is cautious of a period following
"Adjusting Temp".
Varies Varies Warming up.
Varies Varies A printer is in power save mode.
to the Power Save mode, pops
up with a press or successive
presses of the power save button,
and three seconds after that,
disappears, the display being
restored.
Varies Varies Indicates the printer goes into the
Sleep Mode. The printer goes into
the mode immediately after this
message appears, and in fact the
message is hard to read.
Varies Varies Downloading PU F/W (This is not
user-level error)
This function is secret to users.
Therefore, this status does not
occur in a user environment.
Varies Blink Indicates that the printer is
executing the remote maintenance
mode. During this mode, users
have no permission to operate the
printer.
Status level Error code
LCD
□
FOR MAXIMUM
PERFORMANCE
ALWAYS USE
%COMPANY_NAME%
ORIGINAL
Warning 
TONER LOW
Warning

NON RECOMMENDED
TONER
Warning

NON RECOMMENDED
TONER.
Warning 
Non Recommended
Toner
Warning PRESS ONLINE SW
ERROR POSTSCRIPT
Warning PRESS ONLINE SW
ERROR PDL
Warning

ORDER DRUM
2. Procedures for Repairing
LED
Function
Ready Atten
This should be appeared
after the toner/drum/
print cartridge low/empty
warning) messages when the
OKIORIGINALCONSUMABLEDISPLAY
is ON to display this.
Varies On Toner amount is low. Displayed in
(Blink) a combination of other message in
(Off) the first line.
Varies On It is not a toner cartridge of an
original manufacturer's product.
Varies On It is not a toner cartridge of an
original manufacturer's product.
Varies On It is not a toner cartridge of an
original manufacturer's product.
Varies Varies Interpreter detects an error due
to the following reason. Receive
data after this is ignored until the
job completion. When the job
is completely received, this is
automatically cleared.
- The job has a grammatical error.
- The page is complicated, and
VM was used up.
Varies Varies This is the status to recognize the
analysis error that occurred during
PDL processing.
Stays displayed until the ONLINE
button is pressed.
Varies On The life of the drum (warning).
(Off) Displayed in a combination of
other message in the first line. The
printer stops at the point when it
reaches the drum life (Shifts to
error, OFF-LINE).
2-6