Oki ES5112dn Maintenance Manual page 23

Status level Error code
LCD
Warning

TONER EMPTY
Warning 
TONER SENSOR
Warning 
TONER NOT
INSTALLED
Warning

DRUM LIFE
Warning

HEAD DATA ERROR
LED
Function
Ready Atten
Varies On The thing that the toner empties is
shown.
This status (Warning) is displayed
to open/close the cover or turn on
the power supply again after the
error of no toner occurs.
Varies On The thing that abnormality is
detected in the toner sensor is
shown.
Operation is possible usually.
When the setting of the engine is
Factory mode, it is assumed the
state of the error.
(ERR 163)
Varies On Notifies the toner cartridge is not
installed. This is a warning only.
Varies On Notifies the life of the drum. Or,
the waste toner box has become
full. This is a warning only.
This appears when the cover was
opened and closed just after the
drum life error occurred.
This occurs when toner empty
error occurs at the same time.
Varies On The LED head calibration data is
missing or invalid. Printing can be
proceeded without calibrating light
radiation.
PU firmware does not notify this
warning to CU firmware at the time
of Shipping Mode. Therefore, this
status does not occur in a user
environment.
Status level Error code
LCD
Warning

%TRAY% EMPTY
Warning
□
%TRAY% MISSING
Warning

FILE SYSTEM IS FULL
Warning

FILE IS WRITE
PROTECTED
Warning PRESS ONLINE SW
EXPIRED SECURE
JOB
Warning
□
ACCOUNTING LOG
BUFFER IS NEAR
FULL
Warning
□
ACCOUNTING
LOG BUFFER
FULL(DELETE OLD
LOGS)
2. Procedures for Repairing
LED
Function
Ready Atten
Varies On %TRAY%: The tray is empty.
Treated as Warning until printing
to the empty tray is designated.
%TRAY%
TRAY1
TRAY2
Varies On Shown that the cassette is
extracted from the tray. Treats as
warning until the tray in which the
cassette is extracted has printing
specification.
%TRAY%
TRAY1
Varies On Disk-full is occurring. Because
this is a temporary warning, it
remains until the end of the job
and disappears.
Varies On An attempt to write in a read-only
file was done. Because this is a
temporary warning, it remains until
the end of the job and disappears.
Varies On Indicates that an applicable
job has been automatically
deleted as the retention period
for authentication printing has
expired.
Varies Varies It indicates the Job Accounting log
buffer is near full.
Varies Varies The function isn't accepted
because log buffer is full.
(Related to JobAccount).
This message is displayed, if the
log buffer is full and "Operation at
Log Full" in Job Accounting Server
Software is set to "Delete old
logs".
The new jobs will be able to
execute after the following
operations.
1. The log in the unit must be
got by Job Accounting Server
Software.
2. The setting of "Operation at
Log Full" must be changed to
"Does not acquire logs".
2-7