Oki ES5112dn Maintenance Manual page 21

Status level Error code
LCD
Initializing FLASH FORMAT
Initializing PU FLASH ERROR
Initializing COMMUNICATION
ERROR
Initializing STATUS MODE
LED
Function
Ready Atten
Off Off Displays that Flash memory is
being formatted.
It is displayed it when Resident
Flash memory not fomented are
detected, or "MAINTENANCE
MENU"-"FLASH FORMAT" of
a factory maintenance menu is
performed.
The function mentioned above is
secret to users. Therefore, this
status does not occur in a user
environment.
Off Off It is shown that PU firmware has
booted in Loader mode.
When CU firmware received PU
Ver "00.00.00" from PU firmware,
CU firmware displays this status.
If initialization is completed, it will
change to the warning status.
This status may occur also in
a user environment. When it
occurs, the maintenance by a
maintenance member is required
(equivalent to S/C).
Off Off Displays that communication to
PU firmware failed.
This status may occur also in
a user environment. When it
occurs, the maintenance by a
maintenance member is required
(equivalent to S/C).
Off Off Displays that normal Online mode
starts.
Data (Job) from an external
portion is processed even though
an error takes place after Online
(ready) state once this mode
starts.
Displays Error or Warning on a
panel.
If a power supply is
turned on pressing a
<OK>+<Back>+<Down> switch,
it will enter into this mode.
This function is secret to users.
Therefore, this status does not
occur in a user environment.
Status level Error code
LCD
Normal READY TO PRINT
Normal OFFLINE
Normal FILE ACCESSING
Normal DATA ARRIVE
Normal PROCESSING
Normal DATA
Normal PRINTING
Normal PRINT DEMO PAGE
Normal PRINT FONT
Normal PRINT MENU MAP
Normal PRINT FILE LIST
Normal PRINT ERROR LOG
Normal PRINT NETWORK
CONFIG
Normal
□
COLLATE COPY iii/jjj
Normal 
COPY kkk/lll
Normal PREPARING CANCEL Blink Varies Preparing cancelling.
Normal CANCELING JOB
Normal CANCELING JOB
(JAM)
2. Procedures for Repairing
LED
Function
Ready Atten
On Off Shows on-line status.
Off Off Shows off-line status.
* Ready LED in off-line is always
assumed to be Off.
Varies Varies The status showing FILE SYSTEM
(FLASH) is being accessed.
Varies Varies Data receiving, process not
started yet.
Blink Varies Data receiving or output
processing
Varies Varies Un-printed data remains in Buffer.
Waiting for data to follow.
Varies Varies A printer is printing.
Varies Varies Printing Demo Pages
Varies Varies Printing Font Lists
Varies Varies Printing Menu Maps
Varies Varies Printing File Lists
Varies Varies Printing Error Logs
Varies Varies It is shown that a network setup is
printing.
Varies Varies Collate printing. iii: The number
of copy in printing. jjj: the total
number of printing.
Varies Varies Copy printing. kkk: The number
of pages in printing. lll: The total
number of printing.
Blink Varies Indicates that job cancellation has
been instructed and data is being
ignored until the job completion.
Blink Varies Indicates if JAM occurs when
Jam Recover is OFF, that job
cancellation has been instructed
and data is being ignored until the
job completion.
2-5