Oki ES5112dn Maintenance Manual page 47

Category Item
ADMIN OTHERS RAM RECEIVE
SETUP SETUP SETUP BUF SIZE
RESOURCE
SAVE
FLASH FLASH
SETUP INITIALIZE
Value Default Function / Notes
AUTO * Sets the size of receive
0.1 MB buffer
0.2 MB
0.5 MB
1 MB
2 MB
4 MB
AUTO Sets the size of resource
OFF * saving area.
0.1 MB This Item does not appear
0.2 MB in Non-PS models.
0.5 MB
1 MB
2 MB
4 MB
EXECUTE Initializes the range of open
area of Flash (displayed on
File List).
When the OK key is
pressed, the following
confirmation message
appears.
ARE YOU SURE?
YES/NO
If NO is selected, the
previous menu display
resumes.
If YES is selected, the
following confirmation
message appears.
EXECUTE NOW?
YES/NO
If NO is selected, the
previous menu display
resumes. At this time, the
request to execute FLASH
initialization is put into the
memory and initialization
will be executed at power
cycle.
If YES is selected, reboot
takes place, and FLASH is
initialized at rebooting cycle.
Category Item
ADMIN OTHERS FLASH FORMATTING PCL
SETUP SETUP SETUP
STORAGE ENABLE
SETUP INITIAL
JOB LOG SAVE JOB
SETUP LOG
CLEAR JOB
LOG
SECURITY ACCESS
SETUP CONTROL
3. ADJUSTMENT
Value Default Function / Notes
* Formats a specified partition.
COMMON
PS When the OK key is
pressed, the following
confirmation message
appears.
ARE YOU SURE?
YES/NO
If NO is selected, the
previous menu display
resumes.
If YES is selected, the
following confirmation
message appears.
EXECUTE NOW?
YES/NO
If NO is selected, the
previous menu display
resumes. At this time, the
request to execute partition
formatting is put into the
memory and formatting will
be executed at power cycle.
If YES is selected, reboot
takes place and the partition
is formatted at rebooting
cycle.
NO * Prevents a setting change
YES accompanying initialization
of Block Deveice(FLASH).
ENABALE
DISABLE *
EXECUTE
ENABALE
DISABLE *
3-3