Time Of Day; Language J; Standby - Miele PW 5064 MopStar 60 Operating And Installation Instructions

Settings/Supervisor level menu

Time of day

First select either a 24 hour or 12
hour clock or to not have a clock
displayed at all. Then set the current
time of day.
If you select the "No time displayed"
option here, the start time for a
programme can be delayed by up to
96 hours.
To select a 24 hour or 12 hour clock
^ Select the clock option you want and
confirm your selection.
The display will then change to the
screen for setting the time of day.
To set the time (of day)
^ Set the hour with the – and + buttons
and confirm your setting by pressing
the OK button. Now set the minutes.
The display will return to the Settings
menu.
64

Language J

The display can be set to appear in
one of several different languages.
^ Select the language you want and
confirm your selection.

Standby

To save energy, the display goes out
after 10 minutes and the indicator
light for the Start button flashes
slowly.
Turning the programme selector or
pressing a button switches the display
back on again.
There are two options:
On
Standby comes on:
– if a programme is not selected after
the machine has been switched on.
– after a programme has started.
– after the end of a programme.
Not in current Prog.
(the machine is delivered with this
option selected)
Standby comes on:
– if a programme is not selected after
the machine has been switched on.