Time Of Day; Supervisor Level; Display Contrast/Display Brightness - Miele PW 5105 Vario Commissioning Manual

Settings/Supervisor level menu

Time of day

First select whether you want the
clock displayed as a 24 hour or 12
hour clock, or to not display it at all.
Then set the current time of day.
If you select to not display the clock,
the Timer can be used to delay the
start by up to 24 hours, i.e. it will
show how many hours until the start
but not the current time of day.
To select a 24 hour or 12 hour clock
^ Select the clock option you want and
confirm your selection.
The display will then change to the
screen for setting the time of day.
To set the time of day
^ Use the multi-function selector to
select the hour and confirm your
selection. Now set the minutes.
Pressing the multi-function selector
again saves the time of day in
memory.
40

Supervisor level

You can alter the access code to the
supervisor level.
^ Enter the old code.
^ Enter a new code.
After you have confirmed the new code,
the display will change to the beginning
of the Settings menu.
Display contrast/Display
brightness
There are ten different display
contrast and brightness settings.
The display contrast/brightness will
change as soon as a different setting is
chosen.
^ Confirm your selection with the
multi-function selector.