Spin-Treat, Std, Disin; Spin-Treat, Standard; Spin-Treat Cloths; Empty Sensor - Miele PW 5064 MopStar 60 Operating And Installation Instructions

Settings/Supervisor level menu

Spin-treat, std, disin.

After carrying out the finishing
process in the Standard mop
programmes, in the mop disinfection
programmes and the Treat mops
programme, you can determine the
level of residual moisture, using the
Spin-treat, std, disin setting.
There are four options:
,,,, (high level of residual moisture)
to
, (low level of residual moisture)

Spin-treat, standard +

After carrying out the finishing
process in the Standard plus mop
programme, you can determine the
level of residual moisture, using the
Spin-treat, standard + setting.
There are four options:
,,,, (high level of residual moisture)
to
, (low level of residual moisture)
68

Spin-treat cloths

After carrying out the finishing
process in the Cleaning cloths 40°C/
60°C and Finish cleaning cloths
programmes, you can determine the
level of residual moisture using the
Spin-treat cloths setting.
There are four options:
,,,, (high level of residual moisture)
to
, (low level of residual moisture)

Empty sensor

You can activate the Empty sensor
option for the external liquid
detergent containers so that a
message appears in the display
when a container is empty.
The factory default setting is No (no
empty sensor).