Changing The Programme Sequence; To Cancel A Programme; To Interrupt A Programme; To Alter A Programme - Miele PW 5064 MopStar 60 Operating And Installation Instructions

To cancel a programme

You can cancel a programme at any
time after it has started.
^ Turn the programme selector to
Finish.
The suds will be pumped away and the
programme is cancelled.
^ Press the Door button.
^ Remove the laundry
or
^ Close the door and start a different
programme.
The system lock on the machine is
activated as soon as a Mops or
Cleaning cloths disinfection
programme is started. You will then
not be able to change or cancel the
programme or to open the door.

To interrupt a programme

^ Switch the machine off with the K
button.
To continue with the same programme:
^ Switch the machine back on again
with the K button.
^ Confirm the message shown in the
display, and then press the Start
button.

Changing the programme sequence

To alter a programme

To alter a wash programme
After the start of a programme it is not
possible to select a different
programme.
You will need to cancel the current
programme before you can select a
new one.
To alter the temperature
With some programmes it is possible to
select a different temperature up to 5
minutes after the programme has
started.
^ Press the OK button to highlight the
temperature. You can use the + or -
buttons to alter the temperature.
Confirm with OK.
To alter the spin speed
^ Press the OK button repeatedly until
the spin speed is highlighted. You
can use the – and + buttons to
change the spin speed up until the
final spin begins.
Pre-wash/Pre-rinse
It is not possible to select or de-select
Pre-wash/Pre-rinse after the
programme has started.
31