Table of Contents
Advertisement
Before using the machine for the
first time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filters are
securely tightened to prevent the risk
of water leaks during use.
Switch on the washing machine
Press the button.
The welcome screen will light up.
Setting the language
You will be asked to select the language
you want for the display. It is possible
to change the language at any time via
the
Settings
menu.
Sprache
deutsch
english (AUS)
english (GB)
Touch the or sensor until the
language you want is highlighted in
white.
Confirm your selection of the
language by touching the OK sensor.
Removing the transit bars
A reminder to remove the transit bars
will appear in the display.
Failure to remove the transit bars
can result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in "Installation and connection".
Before using for the first time
Confirm the removal of the transit
bars with the OK sensor.
Setting the time of day (if
necessary)
The display for setting the time will then
appear. First you have to select the
clock format.
Clock format
24 h clock
12 h clock
Touch the sensor if you would like
a 12 hour clock display.
Confirm your choice for the clock
format with the OK sensor.
The display will switch automatically to
the time of day selection.
Set the time of day
Touch the sensor to decrease or
the sensor to increase the hour.
Confirm the hour selected with the
OK sensor. Then set the minutes in
the same way.
Tip: If you have selected the 12 hour
clock format you can then select
pm
.
00
: 00
or
am
19
Advertisement
Table of Contents
