Re-Fitting The Transit Bars; Levelling The Machine; Screwing Out And Adjusting The Feet - Miele PW 5064 MopStar 60 Operating And Installation Instructions

^ Secure the transit bars to the back of
the machine. Make sure that holes b
are fitted over retainers a.
,
The machine must not be moved
without the transit bars in place.
Store them as shown or keep them
in a safe place for future use. They
must be re-fitted if the machine is to
be moved again (e.g. when moving
house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the
procedure.
Installation and connection

Levelling the machine

The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.

Screwing out and adjusting the feet

The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
^ Using the spanner supplied, turn
counter nut 2 in a clockwise
direction. Then turn counter nut 2
together with foot 1 to unscrew.
53