Washer-dryer stack
A Miele tumble dryer can be stacked
on top of this washer-extractor. A "WTV"
stacking kit (optional accessory) is
required for this.
The stacking kit must be fitted by a
Miele authorised service technician.
Replacing the lid
If the lid to the washer-extractor has
been removed to stack it with a tumble
dryer, this must be replaced securely
when the washer-dryer stack is
dismantled.
Installation and connection
Installation on a raised plinth
The washer-extractor can be installed
on a steel plinth (open or closed,
available as an optional Miele
accessory) or on a concrete plinth.
,
If the machine is installed on a
plinth, it must be secured using the
fixing brackets supplied with the
machine. Otherwise there is the
danger of the machine moving and
falling off the plinth during spinning.
55