Miele PW 5064 MopStar 60 Operating And Installation Instructions page 19

D Add detergent
Take the level of soiling and water
hardness into account when
determining the amount of detergent to
dispense.
Too little detergent results in:
– Laundry not getting properly clean,
and with time maybe becoming grey
and hard to the touch.
– Greasy particles clinging to laundry.
– Limescale deposits on the heater
elements.
Too much detergent results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
– A burden to the environment.
See "Detergent" for further information.
How to wash correctly
^ Pull out the detergent drawer and
add detergent to the compartments
as follows:
i = Detergent for the pre-wash
1
( / of the total amount
4
recommended).
j = Detergent for the main wash
§
= Fabric conditioner or liquid
starch
^ Close the detergent drawer.
The § compartment is not used
during Disinfection programmes. Do
not put anything in it.
This machine can be connected to
an external dispensing system for
dispensing liquid agents (see
"Detergent - External dispensing
system").
19