Table of Contents
Advertisement
Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
The washing machine has a sensor
which measures the amount of laundry
in the drum. This determines the
amount of detergent required. To allow
the load size indicator to function
correctly, you must first run a wash
programme without any laundry and
without detergent.
^ Open the stopcock.
^ Press the I-On/0-Off button in.
If the washing machine is being
switched on for the first time, the
welcome screen will appear.
The welcome screen will not appear
again once a programme lasting
longer than 1 hour has been
completed.
After a few seconds the display
changes to show the screen for
selecting your language.
Using for the first time
Setting the language
^ Use the – and + buttons to select the
language you want and confirm your
selection by pressing the OK button.
Set the time of day
The display for setting the clock will
appear.
12:00
Set the time
^ Set the hour with the – and + buttons
and confirm your setting by pressing
the OK button. Now set the minutes.
After you have confirmed the minute
setting, the display will change to
show the transport safety screen.
Transport struts
To avoid the risk of damage, the
transport struts must be removed
before the washing machine is used
for the first time. See "Installation" for
instructions on how to do this.
After removing the transport struts (if
this has not already been done by your
fitter) press the OK button.
11
Advertisement
Table of Contents
