Displaying And Maintaining Web Login; Web Login Example; Http Login Example - HP 5120 series Configuration Manual

To do...
Configure a password for the
local user
Specify the command level of
the local user
Specify the telnet service type
for the local user
Exit to system view
Create a VLAN interface and
enter its view
Assign an IP address and
subnet mask to the VLAN
interface

Displaying and maintaining web login

To do...
Display information about web
users
Display HTTP state information
Display HTTPS state information

Web login example

HTTP login example

NOTE:
This example is not supported in FIPS mode.
Network requirements
As shown in
is 192.168.0.58/24.
Use the command...
password { cipher | simple }
password
authorization-attribute level
level
service-type telnet
quit
interface vlan-interface
vlan-interface-id
ip address ip-address { mask
| mask-length }
Figure 19, the PC is connected to the device over an IP network. The IP address of the Device
Use the command...
display web users [ | { begin | exclude |
include } regular-expression ]
display ip http [ | { begin | exclude |
include } regular-expression ]
display ip https [ | { begin | exclude |
include } regular-expression ]
67
Remarks
Required
By default, no password is configured for the
local user.
Required
By default, no command level is configured for
the local user.
Required
By default, no service type is configured for
the local user.
—
Required
If the VLAN interface already exists, the
command enters its view.
Required
By default, no IP address is assigned to the
VLAN interface.
Remarks
Available in any view
Available in any view
Not supported in FIPS
mode
Available in any view