Displaying And Maintaining Cli Login - HP FlexFabric 7900 Series Configuration Manual

Displaying and maintaining CLI login

Execute display commands in any view and the other commands in user view.
Task
Display online CLI user
information.
Display user line
information.
Display the source IPv4
address or interface
configured for the device
to use for outgoing Telnet
packets when serving as a
Telnet client.
Release a user line.
Lock the current user line.
Send messages to user
lines.
Command
display users [ all ]
display line [ num1 | { aux | vty }
num2 ] [ summary ]
display telnet client
free line { num1 | { aux | vty } num2 }
lock
send { all | num1 | { aux | vty }
num2 }
35
Remarks
N/A
N/A
N/A
Multiple users can log in to the device to
simultaneously configure the device.
When necessary, you can execute this
command to release some connections.
You cannot use this command to release
the connection you are using.
By default, the system does not lock any
user line.
This command is not supported in FIPS
mode.
Available in user view.