HP 5120 series Configuration Manual page 128

To do...
Enter system view
Enable the validity check function
when upgrading the Boot ROM
Return to user view
Save the Boot ROM program to the
root directory of the Flash of the
master device by using FTP, TFTP,
or other available methods.
Upgrade the Boot ROM program
on member devices
Reboot a specified member switch
or the IRF virtual device
CAUTION:
To execute the bootrom command successfully, save the Boot ROM file in the root directory of the storage
media on a member device.
Use the command...
system-view
bootrom-update security-check
enable
quit
—
bootrom update file file-url slot
slot-number-list
reboot [ slot slot-number ]
121
Remarks
—
Optional
By default, the validity check
function is enabled at the time of
upgrading Boot ROM.
The Boot ROM programs of
member devices vary with devices,
so users are easily confused when
upgrading the Boot ROM. With the
validity check function enabled,
the device can strictly check the
Boot ROM upgrade files for
correctness and the version
configuration information to ensure
a successful upgrade.
—
Required
For more information about FTP or
TFTP, see the chapters "FTP
configuration " and " TFTP
configuration. "
In FIPS mode, you must use SFTP to
transfer the Boot ROM program.
Required
Available in user view.
In FIPS mode, the program must
pass authenticity verification
before this command can be
executed.
The slot keyword specifies a switch
by its member ID of the IRF virtual
device. If the keyword is not
provided, the IRF virtual device will
reboot.
Available in user view.