Displaying And Maintaining Ftp - HP 5120 series Configuration Manual

# Log in to the FTP server through FTP.
c:\> ftp 1.1.1.1
Connected to 1.1.1.1.
220 FTP service ready.
User(1.1.1.1:(none)):ftp
331 Password required for ftp.
Password:
230 User logged in.
# Download the configuration file config.cfg of the IRF virtual device to the PC for backup.
ftp> get config.cfg back-config.cfg
# Upload the configuration file newest.bin to the root directory of the storage medium on the master.
ftp> put newest.bin
ftp> bye
NOTE:
You can take the same steps to upgrade configuration file with FTP. When upgrading the configuration
•
file with FTP, put the new file under the root directory of the storage medium.
• After you finish upgrading the Boot ROM program through FTP, you must execute the bootrom update
command to upgrade the Boot ROM.
Upgrade the IRF virtual device
3.
# Copy the boot file newest.bin to the root directory of the storage medium on a slave switch (with the
member ID 2).
<Sysname> copy newest.bin slot2#flash:/
# Specify newest.bin as the main boot file to be used at the next startup for all the member devices.
<Sysname> boot-loader file newest.bin slot all main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
The specified file will be used as the main boot file at the next reboot on slot 2!
# Reboot the IRF virtual device and the boot file is updated at the system reboot.
<Sysname> reboot
CAUTION:
The boot file used for the next startup must be saved under the root directory of the storage medium. You
can copy or move a file to the root directory of the storage medium. For more information about the
boot-loader command, see the

Displaying and maintaining FTP

To do...
Display the configuration of the FTP client
Display the configuration of the FTP server
Fundamentals Command Reference.
Use the command...
display ftp client configuration [ |
{ begin | exclude | include }
regular-expression ]
display ftp-server [ | { begin | exclude |
include } regular-expression ]
93
Remarks
Available in any view
Available in any view