Using Another Username To Log In To An Ftp Server - HP 5120 series Configuration Manual

Delete useless files for effective use of the storage space.
2.
Set the file transfer mode. FTP transmits files in two modes: ASCII and binary. ASCII mode transfers
3.
files as text. Binary mode transfers files as raw data.
Use the lcd command to display the local working directory of the FTP client. You can upload the
4.
file under this directory, or save the downloaded file under this directory.
Upload or download the file.
5.
Follow these steps to operate the files on an FTP server:
To do...
Display detailed information
about a directory or file on the
remote FTP server
Query a directory or file on the
remote FTP server
Delete the specified file on the
remote FTP server permanently
Set the file transfer mode to
ASCII
Set the file transfer mode to
binary
Set the data transmission mode
to passive
Display the local working
directory of the FTP client
Upload a file to the FTP server
Download a file from the FTP
server

Using another username to log in to an FTP server

After the switch serving as the FTP client has established a connection with the FTP server, you can use
another username to log in to the FTP server. For more information about establishing an FTP connection,
see "Establishing an FTP
This feature allows you to switch to different user levels without affecting the current FTP connection; if you
input an incorrect username or password, the current connection will be terminated, and you must log in
again to access the FTP server.
Follow the step below to use another username to log in to the FTP server:
Use the command...
dir [ remotefile [ localfile ] ]
ls [ remotefile [ localfile ] ]
delete remotefile
ascii
binary
passive
lcd
put localfile [ remotefile ]
get remotefile [ localfile ]
connection."
87
Remarks
Optional
The ls command displays the name of a
directory or file only, while the dir
command displays detailed information
such as the file size and creation time.
Optional
The ls command displays the name of a
directory or file only, while the dir
command displays detailed information
such as the file size and creation time.
Optional
Optional
ASCII by default.
Optional
ASCII by default.
Optional
Passive by default.
Optional
Optional
Optional