Error Messages - Konica Minolta bizhub c3350 User Manual

4.9 Major messages and actions
Message
[Setting an administrator
password is required in order
to improve security.]
[Setting Password Rules are
required in order to improve
security.]
[Setting an administrator
password/Password Rules
are required in order to im-
prove security.]

Error messages

Message
[Configuration of options has
been changed.]
[There is an open compo-
nent.]
[Paper Jam]
[Staple Jam]
[Imaging Unit Installation Er-
ror]
[Incorrect Imaging Unit]
[Processing Tray Paper Left]
[New Imaging Unit Detection
Error]
[Fusing Unit Installation Er-
ror]
[Install toner cartridge.]
[New Toner Cartridge Detec-
tion Error]
[Waste Toner Box Full]
[Imaging Unit needs to be re-
placed.]
[Replace Toner]
[Maintenance/Troubleshooting]
Description
The default administrator pass-
word remains unchanged in
[Quick Security Setting].
Password Rules is disabled in
[Quick Security Setting].
The default administrator pass-
word remains unchanged in
[Quick Security Setting]. Also,
Password Rules is disabled.
Description
The option configuration was
changed while the power was
turned on.
The cover is opened.
A paper jam has occurred.
A staple jam has occurred.
The Imaging Unit is not installed
correctly.
An incorrect Imaging Unit has
been installed.
Paper is left on the Processing
Tray.
The usage status of the new Im-
aging Unit is not detected.
The Fusing Unit is not installed
correctly.
The Toner Cartridge is not in-
stalled correctly.
The usage status of the new
Toner Cartridge is not detect-
ed.
The Waste Toner Bottle has be-
come full.
The operating life of the Imaging
Unit has expired.
Toner is depleted.
Remedy
Change the administrator password
from the default to any password.
A warning is released one minute af-
ter it has occurred.
Enable Password Rules.
A warning is released one minute af-
ter it has occurred.
Change the administrator password
from the default to any password,
then enable Password Rules.
A warning is released one minute af-
ter it has occurred.
Remedy
Restart this machine.
Close the cover.
Check a paper jam location, then re-
move the jammed paper.
Open the Left Cover, then remove
the jammed staples.
For details, refer to page 3-19.
Install the Imaging Unit correctly.
Install an Imaging Unit which is our
genuine product with the correct
color and correct marketing area.
Remove paper from the Processing
Tray, then reset the error on the
Control Panel.
Remove and insert the Imaging
Unit, then close all the doors.
For details, refer to page 2-6.
Install the Fusing Unit, then close all
doors.
Correctly install the Toner Car-
tridge, and close all doors.
For details, refer to page 2-3.
Remove and insert the Toner Car-
tridge, then close all the doors.
For details, refer to page 2-3.
Replace the Waste Toner Bottle.
For details, refer to page 2-12.
[Contact your service representa-
tive.] If appears, contact your service
representative.
Replace the Imaging unit. For de-
tails, refer to page 2-6.
[Contact your service representa-
tive.] If appears, contact your service
representative.
Replace the Toner Cartridge.
For details, refer to page 2-3.
4
4-18