2.2
Replacing consumables
15
Install all of Toner Cartridge, Waste Toner Bottle, and Imaging Unit.
CAUTION
Do not touch the copper terminals of the Toner Cartridge and Imaging Unit. Doing so may cause stat-
ic electricity to damage the product.
% For information on how to install a Toner Cartridge, refer to page 2-3.
% For information on how to install a Waste Toner Bottle, refer to page 2-12.
% For information on how to install an Imaging Unit, refer to page 2-6.
16
Close the Front Cover.
17
Connect the power cable, then turn the power of this machine on.
18
Select [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Life] - [New Release]
- [Image Transfer Belt Unit], then reset the counter.
[Maintenance/Troubleshooting]
2
2-21