Konica Minolta bizhub c3350 User Manual page 78

4.6 Cannot perform copy
Description of problem
An output copy is curled.
The area around an image
gets smudged.
Cannot switch to the 2-Sided
> 1-Sided or 2-Sided > 2-
Sided function.
[Maintenance/Troubleshooting]
Check points
Curls may appear depending
on the paper type (recycled
paper, for example).
Is the Original Cover Pad
dirty?
Is the paper selected of a size
larger than the original size?
(When copying at full size or
100.0% zoom ratio)
Is the size or orientation of
the original different from
that of the paper?
(When copying at full size or
100.0% zoom ratio)
Have you selected the zoom
ratio for reduced copying
that is suited for the paper
size?
(When the reduced copying
zoom ratio has been selected
manually)
Have settings been selected
that cannot be combined?
Remedy
Remove the paper from the paper tray,
turn it over, then load it again.
Replace with new dry paper.
Paper curls can be reduced by enabling
[Paper Curl Adjustment]. [Paper Curl
Adjustment] adjusts paper curls and en-
ables smoother ejection of paper into
the processing tray.
For details, refer to Chapter 5 "Adminis-
trator Settings" in [User's Guide: De-
scription of Utility Keys]. (This function is
only available when bizhub C3850FS is
used.)
Clean the Original Cover Pad with a
soft cloth dampened with a mild deter-
gent.
Select a paper size that is the same as
the original.
Otherwise, tap [Zoom] on the copy main
screen to select [Auto], and perform en-
larged copying at a zoom ratio matching
the paper.
Select a paper size that is the same as
the original.
Otherwise, re-load paper in the same
orientation as the original.
Select the zoom ratio that matches the
paper size.
Otherwise, tap [Zoom] on the copy main
screen to select [Auto], and perform re-
duced copying at a zoom ratio matching
the paper.
Check the combinations of the selected
settings.
4
4-14