Error Messages - Konica Minolta bizhub C3850 User Manual

4.8 Major messages and actions

Error messages

Message
[Configuration of options has
been changed.]
[There is an open compo-
nent.]
[Paper Jam]
[Imaging Unit Installation Er-
ror]
[Fusing Unit Installation Er-
ror]
[Install toner cartridge.]
[Waste Toner Box Full]
[Replace imaging unit]
[Replenish Toner]
[Paper Size Mismatch]
[Replenish Paper]
[Paper Empty]
[Paper Size/Type Mismatch]
[Output Tray Full]
[Memory Overflow]
[Stored Job Error]
[HDD Capacity Over]
[Maintenance/Troubleshooting]
Description
The option configuration was
changed while the power was
turned on.
The cover is opened.
A paper jam has occurred.
The Imaging Unit is not installed
correctly.
The Fusing Unit is not installed
correctly.
The Toner Cartridge is not in-
stalled correctly.
The Waste Toner Bottle has be-
come full.
The operating life of the Imaging
Unit has expired.
Toner is depleted.
Paper of the specified size is not
loaded into a tray.
No paper is loaded in the tray.
A print job was executed by
specifying the Manual Feed
Tray from the printer driver, but
no paper was loaded in the Man-
ual Feed Tray.
A print job was executed by
specifying Tray X from the printer
driver, but no paper was loaded
in Tray trayX.
The size and type of the paper
loaded in the tray specified from
the printer driver are different
from those of the paper loaded in
the tray on the main unit.
The size and type of the paper in
the tray that are specified on the
Control Panel do not match
those of the paper actually load-
ed in the tray.
The amount of paper output to
the Output Tray has reached the
maximum.
Data has been received over the
maximum memory size.
All the available space in memo-
ry has been used up by docu-
ment scanning.
The option configuration is dif-
ferent from that specified when a
job was saved.
The HDD capacity has become
full.
Remedy
Restart this machine.
Close the cover.
Check a paper jam location, then re-
move the jammed paper.
Install the Imaging Unit correctly.
Install the Fusing Unit, then close all
doors.
Correctly install the Toner Car-
tridge, and close all doors.
For details, refer to page 2-3.
Replace the Waste Toner Bottle.
For details, refer to page 2-12.
Replace the Imaging Unit.
For details, refer to page 2-7.
Replace the Toner Cartridge.
For details, refer to page 2-3.
Load the correct paper into the dis-
played tray.
Add paper to the tray, or change the
tray to make prints.
Load paper into the Manual Feed
Tray.
Load paper into Tray X.
Load the paper of the appropriate
size and type into the tray, then
specify the correct size and type for
the loaded paper on the Control
Panel.
Load the paper of the appropriate
size and type into the tray, then
specify the correct size and type for
the loaded paper on the Control
Panel.
Remove the paper from the Output
Tray.
Cancel the job to reduce the amount
of data, then execute the job again.
Reduce the amount of original data.
Return to the option configuration
specified when a job was saved.
Delete data saved on the HDD, if
necessary.
4
4-17