Error Messages; Network Error Message List - Konica Minolta bizhub 600 User Manual

11
11 Appendix
11.1

Error Messages

Network Error Message List

If any of the following messages appear while routing, perform the opera-
tions described below.
Message
Memory Overflow
Search Timeout
Server Connection Error
Logon Error
Specified Folder Does
Not Exist
Server Disk Full
Transmission Error
Data Size Too Large
11-2
Cause and Remedy
The memory has become full. Change the scanning settings, and
then try scanning again.
The connection to the server was cut. Log on again or try transmit-
ting again.
The connection to the server failed. Check the connection settings,
and then try transmitting again.
The server could not be logged on to. Check the connection settings,
and then try transmitting again.
The folder specified for FTP or SMB transmission does not exist.
Check the settings, and then try transmitting again.
The server is full. Contact the server administrator and create free
space.
Transmission failed. The circuits may be malfunctioning or the set-
tings may be incorrect. Check the settings, wait a while, and then try
transmitting again.
Since the size of the data specified by the server was exceeded,
transmission was not possible. Check with server administrator for
the limitations, change the scanning settings, and then try scanning
again.
Appendix
bizhub 750/600