Hartmann TENSOVAL MOBILE Instructions For Use Manual page 168

Error which has
occurred
6 TM IV_GA_GB.indd 170 6 TM IV_GA_GB.indd 170
Possible causes
Cuff does not infl ate
or does not infl ate
fast enough. This can,
among other things,
be due to a too loosely
applied cuff or to
movement.
Cuff loses air/has a leak.
Air release during the
measuring procedure is
too fast or too slow. The
cuff could have become
undone or loosened
itself. A movement dur-
ing the measuring proce-
dure is also a possibility.
The pressure in cuff
exceeds 300 mmHg.
Therefore, an automatic
fall in pressure occurs.
If the battery symbol
fl ashes, the batteries are
almost dead. Only a few
more measurements are
possible.
170
Remedy
Apply the cuff so that it
fi ts snugly around the
wrist.
Return the device to
the designated service
address.
Check the correct
position of the cuff. Do
not move during the
measuring procedure.
Please rest for at least
a minute and take the
measurement again.
Keep new batteries of
the same type handy
(type AA LR03).
27.06.13 12:57 27.06.13 12:57
Er
oc
Im
m