At+ Regtcp; At+ Regid; Usr-Wifi232-A2 Usage Introduction; Module Debug - Jinan USR IOT Technology USR-WIFI232-A2 User Manual

mode:




4.13.2.2.63

AT+ REGTCP

Function: Settings/query Upload Manner.

Format:

Query Operation

AT+ REGTCP<CR>
+ok=<type><CR>< LF ><CR>< LF >
Set Operation

AT+ REGTCP=<type><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

type:



4.13.2.2.64

AT+ REGID

Function: Settings/query Device ID.

Format:

Query Operation

AT+ REGID<CR>
+ok=<ID><CR>< LF ><CR>< LF >
Set Operation

AT+ REGID=<ID><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

ID: ID number, the range is 0 to 65535

Note: the AT command of AT + REDEN, AT + REGTCP, AT + REGID is supported in V5.01.14 and
above version.

5 USR-WIFI232-A2 Usage Introduction

5.1 Module Debug

5.1.1 Software Debug Tools

In order to facilitate the use of my company, development of the serial and network debugging two-
in-one test software, USR-TCP232-Test
Jinan USR IOT Technology Limited
USR-WIFI232-A2 User Manual
id: Registered package of ID.
mac: Registered package of MAC.
off：disable Registered package
first: Module send registration packet when connection established.
every: Send registration packet every time when module send data.
Page 69 of 76
http://www.usriot.com
tec@usr.cn