Ethernet Setting - Jinan USR IOT Technology USR-WIFI232-A2 User Manual

Notes:
Generally, Network protocols support three modes: TCP Server, TCP Client, UDP Client,UDP
Server.
Besides module working as TCP Server (IP address not required in this mode). User must set the
IP address of the device which need communicate with USR-WIFI232-A/B/C module.
Also the Port ID between two sides of the communication devices must keep the same.

4.12.7 Ethernet Setting

This page is used to set Ethernet front-end ports of the module, It can be open or closed.And
also can be set to the WAN port to use, this module can be used as a secondary router, making it
easy for users to network.Specific Settings page is as follows:
Jinan USR IOT Technology Limited
USR-WIFI232-A2 User Manual
Application Setting Page
Figure 31
Ethernet Setting Page
Figure 32
Page 40 of 76
http://www.usriot.com
tec@usr.cn