At+Webu; At+Wap - Jinan USR IOT Technology USR-WIFI232-A2 User Manual

Function: Query WiFi link status as STA

Format:

Query Operation

AT+ WSLK<CR>
+ok=<ret><CR>< LF ><CR>< LF >
Parameters:

ret




This Instruction only effective for USR-WIFI232-A/B/C works as STA. After USR-WIFI232-A/B/C
module boots up again, the setting will be effective. But user can set this command when module
configured as AP.
4.13.2.2.13

AT+WEBU

Function: Set/Query WEB page login parameters;

Format:

Query Operation

AT+WEBU<CR>
+ok=<usr,password><CR>< LF ><CR>< LF >
Set Operation

AT+ WEBU=< usr,password ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

usr: User name for WEB page access;

password：Password for WEB page access;

4.13.2.2.14

AT+WAP

Function: Set/Query WIFI parameters as AP;

Format:

Query Operation

AT+WAP<CR>
+ok=<wifi_mode,ssid,channel><CR>< LF ><CR>< LF >
Set Operation

AT+ WAP=<wifi_mode,ssid,channel><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

wifi_mode: WiFi protocols






ssid: SSID when module works as AP;

channel: WIFI channel selection


Jinan USR IOT Technology Limited
USR-WIFI232-A2 User Manual
"Disconnected", if no WiFi connection;
"AP' SSID（AP's MAC" ）, if WiFi connection available;
"RF Off", if WiFi OFF;
11BG
11B
11G
11BGN
11N
AUTO
Page 53 of 76
http://www.usriot.com
tec@usr.cn