AT+HTTPCN<CR>
+ok=<Connection><CR>< LF ><CR>< LF >
Set Operation:
AT+HTTPCN=<Connection><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
Connection: Max length is 20 bytes.
4.13.2.2.49
AT+ HTTPUA
Function:Set/Query User-Agent of HTTP protocol header.
Format:
Query Operation:
AT+HTTPUA<CR>
+ok=<Parameter><CR>< LF ><CR>< LF >
Set Operation:
AT+HTTPUA=<Parameter><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
Parameter: Max length is 20 bytes.
4.13.2.2.50
AT+WSSSIDA
Function: Set/query the first AP's ssid of 3 sta parameters settings .
Format:
Query Operation
AT+WSSSIDA<CR>
+ok=<ap's ssid><CR>< LF ><CR>< LF >
Set Operation
AT+ WSSSIDA=<ap's ssid ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
ap's ssid: AP's SSID
This Instruction only effective for USR-WIFI232-A/B/C works as STA. After USR-WIFI232-A/B/C
module boots up again, the setting will be effective. But user can set this command when module
configured as AP.
4.13.2.2.51
AT+WSSSIDB
Function: Set/query the second AP's ssid of 3 sta parameters settings .
Format:
Query Operation
AT+WSSSIDB<CR>
+ok=<ap's ssid><CR>< LF ><CR>< LF >
Set Operation
AT+ WSSSIDB=<ap's ssid ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
ap's ssid: AP's SSID
Jinan USR IOT Technology Limited
USR-WIFI232-A2 User Manual
Page 64 of 76
http://www.usriot.com
tec@usr.cn