At+Wskey; At+Wsssid; At+ Wslk - Jinan USR IOT Technology USR-WIFI232-A2 User Manual

mode:WIFI work mode



After USR-WIFI232-A/B/C module boots up again, the setting will be effective.
4.13.2.2.10

AT+WSKEY

Function: Set/Query WIFI security parameters as STA;

Format:

Query Operation

AT+WSKEY<CR>
+ok=<auth,encry,key><CR>< LF ><CR>< LF >
Set Operation

AT+ WSKEY=< auth,encry,key><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

auth: Authentication mode





encry:Encryption algorithm





key: password, ASCII code, shall less than 64 bit and greater than 8bit

This Instruction only effective for USR-WIFI232-A/B/C works as STA. After USR-WIFI232-A/B/C
module boots up again, the setting will be effective. But user can set this command when module
configured as AP.
4.13.2.2.11

AT+WSSSID

Function: Set/Query WIFI target AP SSID parameters as STA.

Format:

Query Operation

AT+WSSSID<CR>
+ok=<ap's ssid><CR>< LF ><CR>< LF >
Set Operation

AT+ WSSSID=<ap's ssid ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

ap's ssid: AP's SSID

This Instruction only effective for USR-WIFI232-A/B/C works as STA. After USR-WIFI232-A/B/C
module boots up again, the setting will be effective. But user can set this command when module
configured as AP.
4.13.2.2.12

AT+ WSLK

Jinan USR IOT Technology Limited
USR-WIFI232-A2 User Manual
AP
STA
OPEN
SHARED
WPAPSK
WPA2PSK
NONE: When "auth=OPEN", effective
WEP: When "auth=OPEN" or "SHARED", effective
TKIP: When "auth= WPAPSK", effective or "WPA2PSK", effective
AES: When "auth= WPAPSK", effective or "WPA2PSK", effective
Page 52 of 76
http://www.usriot.com
tec@usr.cn