Parameters Configuration; Firmware Upgrade - Jinan USR IOT Technology USR-WIFI232-A2 User Manual

This function is user selected factory setting and RELD instruction will not effective for this
function. If user not requires this function, the default factory setting is Status One. Contact with
USR Technology for more detailed support.
4.10

Parameters Configuration

USR-WIFI232-A2 module supports two methods to configuration parameters: Web Accessing
and AT+instruction set.
Web accessing means users can configure parameters through built-in webpage. When USR-
WIFI232-A2 module connected to wireless network, parameters configuration is done on a PC
connected to the same wireless network. AT+instruction set configuration means user configure
parameters through serial interface command. Refer to "AT+instruction set" chapter for more
detail.
Notes:
USR can customized the parameters setting as customer request and ship USR-WIFI232-A/B/C
modules with these parameters as factory default configuration. It will reduce user's module
configuration time for mass production. Also, if user need different parameters setting for every
module, USR can provide the auto-configuration tool to speed up the module configuration
duration. Please contact USR technical interface to acquire this tool if required.
4.11

Firmware Upgrade

USR-WIFI232-A2 module supports firmware upgrade online.
Jinan USR IOT Technology Limited
USR-WIFI232-A2 User Manual
Page 35 of 76
http://www.usriot.com
tec@usr.cn