At+Wsssidc; At+Wskeya; At+Wskeyb - Jinan USR IOT Technology USR-WIFI232-A2 User Manual

This Instruction only effective for USR-WIFI232-A/B/C works as STA. After USR-WIFI232-A/B/C
module boots up again, the setting will be effective. But user can set this command when module
configured as AP.
4.13.2.2.52

AT+WSSSIDC

Function: Set/query the third AP's ssid of 3 sta parameters settings .

Format:

Query Operation

AT+WSSSIDC<CR>
+ok=<ap's ssid><CR>< LF ><CR>< LF >
Set Operation

AT+ WSSSIDC=<ap's ssid ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

ap's ssid: AP's SSID

This Instruction only effective for USR-WIFI232-A/B/C works as STA. After USR-WIFI232-A/B/C
module boots up again, the setting will be effective. But user can set this command when module
configured as AP.
4.13.2.2.53

AT+WSKEYA

Function: Set/query the first AP's password of 3 sta parameters settings .

Format:

 Query Operation
AT+WSKEYA<CR>
+ok=<auth,encry,key><CR>< LF ><CR>< LF >
Set Operation

AT+ WSKEYA=< auth,encry,key><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

auth: Authentication mode





encry:Encryption algorithm





key: password, ASCII code, shall less than 64 bit and greater than 8bit

This Instruction only effective for USR-WIFI232-A/B/C works as STA. After USR-WIFI232-A/B/C
module boots up again, the setting will be effective. But user can set this command when module
configured as AP.
4.13.2.2.54

AT+WSKEYB

Function: Set/query the second AP's password of 3 sta parameters settings .

Format:

Jinan USR IOT Technology Limited
USR-WIFI232-A2 User Manual
OPEN
SHARED
WPAPSK
WPA2PSK
NONE: When "auth=OPEN", effective
WEP: When "auth=OPEN" or "SHARED", effective
TKIP: When "auth= WPAPSK", effective or "WPA2PSK", effective
AES: When "auth= WPAPSK", effective or "WPA2PSK", effective
Page 65 of 76
http://www.usriot.com
tec@usr.cn