Inspecting With The Edge Position Inspection Item - Omron fq2 User Manual

4-7 Inspecting with the Edge Position Inspection Item

Edge Position
This inspection item is used to inspect positions. For example, it can be used to see if a label is attached at the
correct position or if a product is set in the correct position.
Places where the color changes greatly are called edges. The positions of these edges are measured.
Edge search
direction
Setup Procedure for Edge Position
Step 1 Selecting the Inspection Item
− [Inspection]
[Inspect]
1
Press an unused inspection item number and press
[Add item.].
2
Press [Edge position].
Registering inspection items: p. 93
Note
Drag the arrow
120
Inspecting with the Edge Position Inspection Item
Sample Settings
Measurement region
Color of edge
to be found
at the bottom of the menu upward to display all of the inspection items.
Sample Measurement
An edge is detected within the region
according to set direction and color.
OK NG
FQ2 User's Manual